The latest research studies on Perovskite solar cells published by our representative customer-UCLA Professor Yang Yang!

The latest research studies on Perovskite solar cells published by our representative customer-UCLA Professor Yang Yang!


Our QE-R Spectral Response/Quantum Efficiency Measurement System in Yang Yang Lab :

The latest research studies on Perovskite solar cells published by Department of Materials Science and Engineering and California NanoSystems Institute, University of California, of which the research team leader-UCLA Professor Yang Yang, is a world record holder for efficiency in organic solar cells, and is also one of our representative customers.

How honored are we to know that our QE-R measurement system can be a very helpful tool to our customer’s research. We believe that most of the positive feedback that we receive is due to our dedication to good customer services and quality products! Please refer to the abstract of the research article as follow :

Low-Temperature Solution-Processed Perovskite Solar Cells with High Efficiency and Flexibility Abstract: 

Perovskite compounds have attracted recently great attention in photovoltaic research. The devices are typically fabricated using condensed or mesoporous TiO2 as the electron transport layer and 2,207,70-tetrakis-(N,N-dip-methoxyphenylamine)9,90-spirobifluorene as the hole transport layer. However, the high temperature processing (450°C) requirement of the TiO2 layer could hinder the widespread adoption of the technology. In this report,we adopted a low-temperature processing technique to attain high efficiency devices in both rigid and flexible substrates, using device structure substrate/ITO/PEDOT:PSS/CH3NH3PbI3_xClx/PCBM/Al, where PEDOT:PSS and PCBM are used as hole and electron transport layers, respectively. Mixed halide perovskite, CH3NH3PbI3_xClx, was used due to its long carrier lifetime and good electrical properties. All of these layers are solution-processed under 120°C. Based on the proposed device structure, power conversion efficiency (PCE) of 11.5% is obtained in rigid substrates (glass/ITO), and a 9.2% PCE is achieved for a polyethylene terephthalate/ITO flexible substrate.

Keywords : perovskite solar cells,low temperature, planar structure, flexible solar cells
Our QE-R system and company name mentioned in the research article, as shown below :

Professor Yang Yang lab : http://yylab.seas.ucla.edu/facility.aspx
2014-03-04