- Home
- Products
- Others
- Xe Light Source
Research Xenon Lamp House (LH-150)
A stable light source system can be used as a test light source for component aging, and a monochromatic light source can be provided in combination with a monochromator.
Model | Item | Specifications |
---|---|---|
LH-150 | Light Source |
a. 150 W ozone free Xe lamp b. Irradiance intensity: better than 1 sun c. Irradiance direction: horizontal or vertical d. Bulb Lifetime: 1,000 hours e. Diameter of light spot: 33 mm f. Temporal Instability: <±2 %, class A g. Spectral Match: AM 1.5 G, <±25 %, class A h. Non-Uniformity of Irradiance: <±5 %, class B i. Spectrum Range: 300-1100 nm j. Fan Cooling k. AM 1.5 G Filter |
Power Supply |
a. Current Range: 7-9.5 A b. Current Instability: <1 % c. Input: AC 110/220 V,AC±10 % d. Power: 300 W |
|
IVS-KA5000 | Software |
a. Can be compatible with Keithley 24 XX mutimeter/ Agilent 29 XX/ Keithley 26 XX series source meter b. Automatic I-V measurement function: can measure the parameters as following: Vmax/ Imax/ Isc/ Jsc/ Voc/ FF/ Pmax/ Efficiency/ Rs/ Rsh c. Multiple data shown in one picture d. Quick-note function e. Semi-log IV function f. Support NI GPIB, USB & RS232 g. Support direct and pulse measurement mode h. Automatic forward and reverse voltage scan i. One curve can be measured with two scan parameters j. I-T measurement function |
SRC-2824 | Light Intensity Detector |
a. 2 mm irradiance area b. 2824 type Si detector |
SS-GI-DOWN | Sample stage for glove box integration |
a. Suitable for light direction from down to top b. Stage size 220 mm x 234.2 mm c. IC clip Fixed magnet d. Maximum support 6 sub cell in one ITO, the distance with each cell should be 2.54mm e. Fixed platform for reference cell f. Cable protective cover g. Standard DB26 cable connector h. KF40 flange sealed i. Withstand current 2 A j. 4-wire measurement k. Stage with handle l. Suitable for manual multiplexier m. Suitable for automatic multiplexier |
GIV-M6 | Manual multiplexer |
a. Size: L 195 mm x W 185 mm x H 60 mm b. Standard 4mm banana connector c. Standard DB26 co-axial cable connector d. Banana connector can change to BNC connector e. Withstand current 2 A f. Aluminum frame g. 6 sample channels h. 1 reference cell IV channel i. 1 reference cell RTD channel j. Support 2-wire/ 4-wire measurement k. Sample and reference cell channel switch l. 4 mm banana connector cable |
2901 A | Source meter |
a. Keysight B2901a SMU b. Supports one-channel configuration c. Minimum source resolution: 1 pA /1 μV, Minimum measurement resolution: 100 fA/100 nV d. Maximum output: 210 V, 3 A DC/ 10.5 A pulse e. Arbitrary waveform generation and digitizing capabilities from 20 μs interval |